Stop gap coverage is employers liability protection for businesses whose workers’ compensation comes from a state-run fund. Those fund policies pay statutory benefits but leave out the employers liability part, so a lawsuit tied to a work injury can land on your balance sheet. A stop gap endorsement closes that hole. If you operate in Ohio, North Dakota, Washington or Wyoming, or you run trucks through them, you should confirm you have it before your next renewal.
TL;DR
- Stop gap coverage supplies employers liability protection that state-fund workers’ comp policies do not include.
- It matters most in the four monopolistic fund states: Ohio, North Dakota, Washington and Wyoming.
- Depending on your operations, it is attached to a workers’ comp policy or to a general liability policy.
- It is non-standard coverage, so the wording, limits and exclusions differ from one policy to the next.
- A state-fund certificate alone does not prove you have it. Ask for the endorsement to be listed.
Table of Contents
- What stop gap coverage actually does
- Which states and employers are affected
- What trucking companies should know
- What injury claims it is meant to respond to
- How to review a stop gap policy
- What affects the price
- Common mistakes
- Perspective
- Get your coverage lined up
- FAQ
- Sources
What stop gap coverage actually does
What gap are we talking about? In most states, a workers’ comp policy has two parts. Part One pays the medical bills and lost wages of an injured employee. Part Two is employers liability, which responds when the employee, or someone connected to the claim, sues you over the injury. In a monopolistic state, you must buy workers’ comp from the state fund, and that fund policy does not include the employers liability piece.
That is the gap. The professional insurance glossary maintained by IRMI describes a stop gap endorsement as one used mainly to provide employers liability coverage for work-related injuries in monopolistic fund states, precisely because fund policies do not provide it.
Think of it as a patch rather than a separate product line. The injury benefits still come from the state fund. The endorsement covers the lawsuit exposure that sits next to those benefits.
Why would an employee sue if workers’ comp already pays? Workers’ comp is built to be the main remedy for a workplace injury, but it is not always the end of the story. Claims can arise when an injured worker alleges the employer deliberately created the danger, or when a family member or another party brings a related claim. Ohio is a clear example. Attorneys at Isaac Wiles note that Ohio’s workers’ comp program does not cover employer intentional tort claims and that injured workers are increasingly pursuing them. Under R.C. §2745.01©, removing a safety guard on purpose creates a rebuttable presumption that the employer intended to injure.
The same source points to Hoyle v. DTJ Enterprises (2015), where the Ohio Supreme Court found that insurers may be compelled to defend the employer against an intentional tort claim but not to indemnify it. In plain terms, even good stop gap coverage has boundaries, which is why the policy language matters.
Which states and employers are affected
Where is stop gap coverage most relevant? The four monopolistic fund states are Ohio, North Dakota, Washington and Wyoming. Our own guide to monopolistic state workers’ comp walks through how each state handles it. If your employees work in one of them, you generally buy workers’ comp from the state, and stop gap is the add-on that addresses employers liability.
Does it attach to workers’ comp or general liability? It depends on where you operate. According to IRMI, the endorsement is attached to the workers’ compensation policy when you also have operations in nonmonopolistic states. If your operations are exclusively in a monopolistic fund state, it is attached to your general liability policy instead.
The Indiana Compensation Rating Bureau gives the rating-side detail. The Employers Liability Coverage Endorsement WC 00 03 03 can be used to fill the stop gap, and a state special endorsement, WC 34 03 01, was created for Ohio exposures. When the only workers’ comp policy comes from a monopolistic state, stop gap is typically included on the carrier’s general liability policy, if the carrier offers it.
That split creates a practical consequence. If your only coverage in a fund state is the state policy plus a general liability policy, the stop gap wording lives in the general liability form, and nobody may look for it there at renewal.

What trucking companies should know
Why does this matter for a fleet? Trucking is a labor-heavy, hazardous business, and drivers, dock workers and mechanics are exposed to injury every day. A carrier based in Ohio, or one that sends drivers into Washington or Wyoming, can end up with a mix of coverage: state-fund policies in some places and a private workers’ comp program elsewhere. Mixed operations are exactly where employers liability gaps get missed.
If you are a carrier headquartered in Ohio, our pages on trucking insurance in Ohio and Ohio’s workforce and workers’ compensation explain how the pieces fit together.
Owner-operators and independent drivers raise a related question: whether you need workers’ comp at all, or an alternative. Our comparison of workers’ comp and occupational accident for truckers covers that decision. Stop gap only becomes relevant once you have employees in a monopolistic state.
Is stop gap the same as truck gap insurance? No. Truck gap insurance deals with the difference between what a truck is worth and what you still owe on it after a total loss. Stop gap addresses employee injury lawsuits. The names are close, the risks are different. If you finance equipment, our article on truck gap insurance covers the vehicle side.
What injury claims it is meant to respond to
What kinds of claims does stop gap respond to? The core purpose is employers liability: a legal action against you alleging that a work-related bodily injury or disease was your fault. Typical forms respond to the lawsuit when the state fund benefits do not, and they usually involve a defense obligation plus payment of covered damages up to a limit.
The details are not uniform. The Indiana Compensation Rating Bureau notes that stop gap provided through the endorsement is not part of the standard Employers Liability (Part Two) category, which is available at standard and increased limits in most jurisdictions. It is a distinct, non-standard coverage. A county government contract document on stop gap protection says the same thing from the buyer’s side: the coverage must be carefully reviewed because policy content varies.
So do not assume your form matches what a friend, a competitor or an article describes. Read your own.
How to review a stop gap policy
What should you check before you sign or renew? Work through these points with your agent or quoting platform, in this order.
First, find out where the coverage sits. If you operate only in a monopolistic state, look in the general liability policy. If you also have operations elsewhere, look for the endorsement on the workers’ comp policy. Either way, it should be named on the policy or its endorsement schedule.
Second, look at the limits. Employers liability is commonly written with limits per accident, per employee for disease and as a policy aggregate. Your contracts, lenders or customers may require a minimum, so compare the stop gap limit to those requirements and to the size of your payroll and headcount.
Third, read the exclusions. Because the form is non-standard, exclusions and conditions can differ. Pay attention to how the policy treats intentional acts, since that is the area where employers in states like Ohio face the most litigation. Remember the Hoyle decision: a duty to defend does not guarantee payment of a judgment.
Fourth, check territory and employee coverage. If drivers cross state lines, make sure each state where you have employees is either covered by a workers’ comp policy with employers liability or by stop gap. Overlap is fine. Silence is the problem.
Fifth, match the dates. A stop gap endorsement should run with your workers’ comp and liability terms. If your state-fund coverage renews on one date and your general liability on another, put both on a calendar so there is no stretch where one is missing.

How do you confirm you actually have it? Do not rely on the state-fund certificate. A guide on monopolistic states from Evident ID advises employers to verify that stop gap is listed for monopolistic-state operations, because a state-fund workers’ comp certificate by itself may not confirm employers liability coverage. If you hire subcontractors or work with customers who ask for certificates of insurance, expect the same question from them. Many ask to see the employers liability limits explicitly.
What affects the price
What does stop gap coverage cost? We do not publish a price for it, and any number you see online should be treated as a rough guide, not a quote. Cost is usually driven by the same factors that shape most liability pricing: the type of work your employees do, payroll, headcount, claims history, the limit you choose and the state. A low-hazard office business will not be priced like a company with drivers, loaders and shop staff.
Because stop gap is often written as an endorsement on a policy you already carry, it can be inexpensive relative to the exposure it addresses. The only reliable way to know your figure is to request quotes that name the coverage and the limit you want. When you compare quotes, compare the wording as well as the premium, since two forms with the same price can respond differently.
Common mistakes
Assuming state-fund coverage is complete. The fund pays statutory benefits. It does not give you employers liability. That is the whole reason stop gap exists.
Looking in the wrong policy. If you work only in a monopolistic state, the endorsement may sit on your general liability. If your agent only talks about workers’ comp, ask directly about the liability form.
Treating it as standard. The form is non-standard. Two carriers can offer very different wording and limits, so read each one.
Letting limits lag behind growth. A fleet that has added drivers or yards since the last renewal may need to revisit limits. Our guide on how much insurance a trucking company needs helps you size the full program.
Forgetting contracts. Customers, brokers and lenders may require evidence of employers liability. Find out what they need before a load or a job is on the line.
Perspective
Most of the employers we talk to know they must carry workers’ comp. Far fewer have asked what happens when an injured employee’s claim goes beyond what the fund pays. That question tends to surface at the worst time, with a lawyer’s letter on the desk.
Our view is simple: employers liability should be a line item you chose, not one you discovered. We built our platform so you can request quotes for workers’ compensation, general liability and trucking coverage in one place, compare options from multiple insurers and see how the pieces fit together. When you review a program, ask for the stop gap wording by name and put the limit next to your headcount and contracts.
For trucking operators in particular, mixed-state operations make this review worth doing every renewal. We would rather you ask the question early and calmly than learn the answer under pressure.
Vladimir
Get your coverage lined up
If you are reviewing employers liability, start with the policies it depends on. Our platform lets you request instant online quotes, compare offers from multiple insurers and purchase online. For employees, begin with workers’ compensation. For the liability form that may carry your stop gap wording, look at general liability coverage.

If you run trucks, our trucking insurance quote page is the place to begin. Tell us where your employees work, and ask for stop gap or employers liability to be addressed in the quote you choose.
FAQ
Is stop gap coverage the same as employers liability insurance?
They are closely related. Employers liability is Part Two of a standard workers’ comp policy. Stop gap supplies similar protection where that part is missing, mainly in monopolistic fund states. The Indiana Compensation Rating Bureau treats stop gap as a distinct, non-standard coverage, so read the wording.
Do I need stop gap coverage if I operate in Ohio?
Ohio is a monopolistic state, so your workers’ comp comes from the state fund, which does not include employers liability. Employers there commonly add stop gap to cover that exposure. Confirm with your agent where the endorsement is attached and what limit applies.
Where does the stop gap endorsement go on my policy?
If you also operate in nonmonopolistic states, it is attached to the workers’ comp policy. If you operate only in a monopolistic fund state, it is attached to the general liability policy, according to IRMI. Ask for it to be listed on the schedule of endorsements.
Does stop gap cover every lawsuit from an injured worker?
No coverage does. Stop gap is non-standard, so exclusions and conditions vary, and a duty to defend may not mean payment of every judgment. Review the form with your agent, especially around intentional acts, and match the limit to your exposure.
Is stop gap the same as gap insurance for a truck loan?
No. Loan or lease gap insurance covers the difference between a vehicle’s value and what you owe after a total loss. Stop gap deals with employee injury lawsuits. They protect against different risks.
Sources
- IRMI: stop gap endorsement
- Indiana Compensation Rating Bureau: Employers Liability, Stop Gap
- Isaac Wiles: Stop Gap Coverage A Must For Many Employers
- King County: stop gap protection
- Evident ID: Workers’ Compensation Monopolistic States
